1. Are you ready for the Galaxy S20? Here is everything we know so far!

[LINARO] AWEstruck v1.04 12/14/14 | [3.4.107] v1.05b6 5/30/15

Discussion in 'Android Devices' started by spock1104, May 17, 2014.

  1. dvdavid888

    dvdavid888 Android Enthusiast

    What is the average/recommended temp the CPU and Battery should be running at? I know the cooler the better just trying to see what temps are average.
     

    Advertisement

  2. spock1104

    spock1104 Android Expert
    Thread Starter

    Thanks for the feedback guys, I decided to release beta 6. I already started on the next beta, it will be a nice surprise.

    dvdavid888, I can't find any documentation from Qualcomm on their recommended temperatures but I can tell you my CPU runs anywhere between 20c and 80c.
     
    #602 spock1104, Dec 14, 2014
    Last edited: Dec 14, 2014
    dvdavid888 likes this.
  3. spock1104

    spock1104 Android Expert
    Thread Starter

    Boredom can sometimes be a blessing. Here's a new beta already. I've tweaked the readahead, added prevention of entropy depletion, and patched the kernel up to 3.4.86. That should translate to a little more speed and a lot more stability. F2FS has also been enabled.

    AWEstruck_JB_v1.05_beta1.zip - 9.42 MB

    I anticipate another beta later this week patched to 3.4.105
     
    #603 spock1104, Dec 14, 2014
    Last edited: Dec 14, 2014
    dvdavid888 and roadkill42 like this.
  4. dvdavid888

    dvdavid888 Android Enthusiast

  5. dragonhart6505

    dragonhart6505 Android Expert

    Am I right to assume the latest betas are KK compatible, looking at the changelog saying its unified
     
  6. spock1104

    spock1104 Android Expert
    Thread Starter

    No, only the zip files with kk in the name will be KitKat compatible. I have to compile with different options to get KitKat kernels, the change I noted is that they compile from the same source code. Unfortunately I still don't have a working kernel updater for KitKat. I can at least look into manual update steps until we can get an anykernel updater.
     
    roadkill42 and dragonhart6505 like this.
  7. DaRkSkYxP

    DaRkSkYxP Android Enthusiast

    Was just wondering if otg support was added and if so is a y cable needed
     
  8. spock1104

    spock1104 Android Expert
    Thread Starter

    D'oh, forgot about that one. I'm adding to the to-do list on the first post so I'll remember.

    Our only hope of not needing a Y cable is if I can get pictures of both sides of any and all circuit boards in the phone, so that I can look for a power supply. I think we require a sacrifice.
     
  9. spock1104

    spock1104 Android Expert
    Thread Starter

    Here goes nothing... steps and files to try out the latest beta on KitKat. This is UNTESTED.

    Prerequisites:
    7zip
    cygwin
    abootimg
    AWEstruck_JB_v1.05_beta1.zip - 9.42 MB
    AWEstruck_KK_v1.05_beta1_binaries.zip - 8.69 MB
    the zip file for your KitKat rom
    1. unzip AWEstruck JB in its own folder
    2. copy wlan.ko from the KK binaries zip to the JB folder, in system/lib/modules/prima, and rename prima_wlan.ko (replace the one that is already there)
    3. place abootimg in a location easily accessible from cygwin
    4. extract the boot.img rom the KitKat zip, place in the same location as abootimg
    5. extract zImage from the AWEstruck KK binary zip, place in the same location as abootimg
    6. open cygwin, change directory to the abootimg directory if necessary
    7. abootimg -u boot.img -k zImage
    8. this will likely fail with a message like "boot.img: updated is too big for the Boot Image (7712768 vs 6828032 bytes)"
    9. copy the new size and feed it into abootimg like so:
    10. abootimg -u boot.img -k arch/arm/boot/zImage -c "bootsize=7712768"
    11. copy the modified boot.img to the JB folder
    12. zip all of the files in the JB folder, name it as you choose.
    13. put the zip on your phone
    14. reboot to recovery
    15. for the love of GabeN, perform a full backup!
    16. flash the zip file
    17. reboot
    18. With any luck your phone boots with the kernel. If not, go back to the recovery and restore the boot and system partitions.
     
  10. spock1104

    spock1104 Android Expert
    Thread Starter

    I checked the config and it turns out ZTE enabled OTG from the get-go. So either host power isn't enabled (need to know all of our components to be sure) or we're stuck like the Nexus 4. I'm placing an order on a Y cable anyways. http://www.amazon.com/Micro-Cable-P...p/B00CXAC1ZW/ref=sr_1_1?ie=UTF8&qid=141870078
     
    roadkill42 and DaRkSkYxP like this.
  11. spock1104

    spock1104 Android Expert
    Thread Starter

    It looks like I can add sdxc support by turning on exfat. I'll try to have this in the next beta.
     
    roadkill42, DaRkSkYxP and JHell like this.
  12. JHell

    JHell Android Enthusiast

    ur the man spock
     
  13. spock1104

    spock1104 Android Expert
    Thread Starter

    It should have been obvious to me, this is what rbheromax did. But noooo, I had to go look it up for myself...
     
    rbheromax, roadkill42 and DaRkSkYxP like this.
  14. rbheromax

    rbheromax Android Expert

    Wait I did what? Lol
     
    roadkill42 likes this.
  15. spock1104

    spock1104 Android Expert
    Thread Starter

    rbheromax likes this.
  16. spock1104

    spock1104 Android Expert
    Thread Starter

    rbheromax likes this.
  17. spock1104

    spock1104 Android Expert
    Thread Starter

    Beta 2 is ready! I'm hoping exFAT works, I built it into the kernel despite dorimanx's instructions to build it as a module. I don't have a 64gb sdcard to test with. Other than that, the kernel is now at 3.4.105.

    AWEstruck_JB_v1.05_beta2.zip - 9.42 MB

    [​IMG]

    You're gonna like the way you bench. I guarantee it.
     
  18. spock1104

    spock1104 Android Expert
    Thread Starter

    Just for the heck of it, at my phone's max overclock of 1.83GHz

    [​IMG]
     
    roadkill42 likes this.
  19. dragonhart6505

    dragonhart6505 Android Expert

    Anybody actually build the KK kernel could post a flashable zip? I don't have access to a PC to build it
     
  20. spock1104

    spock1104 Android Expert
    Thread Starter

    get a terminal emulator, use ES File Explorer to do the zipping and unzipping, and this abootimg, and I hope you'll be able to do this from your phone. Good luck.
     
    #620 spock1104, Dec 18, 2014
    Last edited: Dec 18, 2014
  21. dragonhart6505

    dragonhart6505 Android Expert

    The link doesnt go anywhere and the abootimg above is an exe
     
  22. spock1104

    spock1104 Android Expert
    Thread Starter

  23. spock1104

    spock1104 Android Expert
    Thread Starter

    doesen't seem to work on my phone. This is the trouble I've been having trying to make an updater.
     
  24. spock1104

    spock1104 Android Expert
    Thread Starter

    Which ROM are you on? I can make a beta 2 for you. I'm just trying to avoid making a kernel package for each of PhenomX4's ROMs.
     
  25. dragonhart6505

    dragonhart6505 Android Expert

    Regular CM11
     

ZTE Awe Forum

The ZTE Awe release date was Q2 2007. Features and Specs include a 4.13" inch screen, 0.1MP camera, 128GB RAM, and processor.

Q2 2007
Release Date
0
Reviews
Tags:

Share This Page

Loading...