Hey Guys..
I have been noticing that a lot of you are trying to install CWM on your phone.
Unfortunately there is no version out there which works on our phone. Will have to wait till someone ports it for our device.
Now for all of you who have screwed up your recovery. Here is the guide to flash the stock recovery
Download recovery - http://www.mediafire.com/?2556t5c2qaw4wwe
1. Make sure you have ADB or the SDK installed.
If you have rooted your phone successfully then you must have it installed.
2. Download the files from this link : platform-tools.rar
3. Extract the downloaded file to a location of your choice
for example - D:\SDK
4. Now go the folder, press the shift button and right click. You would see an option 'Open command prompt here' - click that to open command prompt.
5. Connect your phone switched off to the pc and press the volume down button and the power button for 10 seconds. You should see the micromax logo.
6. In command prompt type "fastboot devices" without quotes and hit enter.
7. you should see something like
List of devices attached
XXXXXXXXXX device
8. Now copy the recovery.img to the same folder you had extracted the files earlier.
9. In the command prompt window, type "fastboot flash recovery stock recovery.img" without quotes and hit enter
10. After you get a confirmation that flash is successful.
11. Remove the phone and boot into recovery. VOILA!! stock recovery
Show your appreciation.. Hit the thanks button..
I have been noticing that a lot of you are trying to install CWM on your phone.
Unfortunately there is no version out there which works on our phone. Will have to wait till someone ports it for our device.
Now for all of you who have screwed up your recovery. Here is the guide to flash the stock recovery
Download recovery - http://www.mediafire.com/?2556t5c2qaw4wwe
1. Make sure you have ADB or the SDK installed.
If you have rooted your phone successfully then you must have it installed.
2. Download the files from this link : platform-tools.rar
3. Extract the downloaded file to a location of your choice
for example - D:\SDK
4. Now go the folder, press the shift button and right click. You would see an option 'Open command prompt here' - click that to open command prompt.
5. Connect your phone switched off to the pc and press the volume down button and the power button for 10 seconds. You should see the micromax logo.
6. In command prompt type "fastboot devices" without quotes and hit enter.
7. you should see something like
List of devices attached
XXXXXXXXXX device
8. Now copy the recovery.img to the same folder you had extracted the files earlier.
9. In the command prompt window, type "fastboot flash recovery stock recovery.img" without quotes and hit enter
10. After you get a confirmation that flash is successful.
11. Remove the phone and boot into recovery. VOILA!! stock recovery
Show your appreciation.. Hit the thanks button..