1. Are you ready for the Galaxy S20? Here is everything we know so far!

[ROM] CyanogenMod 10 for the LG Motion 4G LGMS770 (l0)

Discussion in 'Android Devices' started by PlayfulGod, Aug 4, 2013.

  1. PlayfulGod

    PlayfulGod Extreme Android User
    Thread Starter

    add em to your build.prop and let us know if they work or not. ;)
     


  2. s810car

    s810car Newbie

    like i said i am a little gun shy about loading it while the issue is there, but true that if no one does it, no way to know lol, i'll try out the rom Wed. when I'm off work a couple days so I have time to fix it if i turn it into a paperweight again...:D
     
  3. sanderjm

    sanderjm Newbie

    I can't find this post. Any help finding this would be appreciated.
     
  4. johnnyl1111

    johnnyl1111 Android Expert

    sanderjm likes this.
  5. s810car

    s810car Newbie

    Ok,trying this rom out finally,I'll try to see what issues I have and hopefully iron them out myself first, and (hopefully) get everything I've done written in here.
    Originally my main reason for even jumping was it looked like all my concerns outside of the backlight issue were already sorted, so maybe assist with at least testing if I couldn't find a source of the problem. After installation and a quick issue with both speaker and in call sound though, I guess I'll take things a bit slower and document every change I do from now on...

    tl;dr: I jumped into flashing my sound mods back in before i really tested sound properly so no promise I didn't cause my own sound issue :D I fixed it though, not with the xloud mod because that fouls up the clearaudio+ packaged with it that I love, theres a post a few pages back called extra volume boost AOSP that I used instead.

    Anyways, I'll mess around with this a couple of days and geek out over some code to see if i can contribute anything, first impression is same minor issues of backlight, 1x icon, etc. overall nice work PG :thumb:
     
  6. s810car

    s810car Newbie

    One minor issue while I remember it, setting the buttons to have a function on lock screen works spotty at best, not at all mostly. I have lock screen on pin number unlock and I was setting the buttons for music (play/pause, next and previous track) if any of that helps
     
  7. s810car

    s810car Newbie

    Bigger issue I noticed, left it plugged in all night and this was 2nd time battery wouldn't show any drain for awhile (30 minutes, and I'm sure NO Rom is that awesome lol), first time was just random yesterday, clearing battery stats fixed it that time, so I'll see if you already have a fix but just documenting this for now
     
  8. Bluetooth doesn't work on calls. If you could look into, that would be great.
     
  9. s810car

    s810car Newbie

    I'll try, but I don't have a Bluetooth headset atm, so I'll have to look at what changed between stock and CM to get an idea. Gonna have to do a clean flash of this anyways, still having in call sound issues which my mods probably helped mess it up , I need to isolate the issue there, and no keypad during calls even when proximity sensor is on, so still a WIP for now, sigh

    Hey PG, which is the best version to use, on the 9/3 version atm, is the prior one better, or should I flash this one?

    Update: on a better note, assuming the battery status is correct, I used less then 20% in 6 hours, mostly standby but a couple calls and 30 min of music, to me that's excellent! Again, side from minor issues, great job on this man!
     
  10. s810car

    s810car Newbie

    Major bug I'm seeing, first searches on it show it's probably cosmetic, CM apparently reports data usage WAY wrong, ignore it if it says you any thru a TB of data like me :/
     
  11. s810car

    s810car Newbie

    For those needing Bluetooth, heres a test for ya, try this build.prop line, its disabled in stock as you see here
    Code (Text):
    1.  
    2. # system property for Bluetooth discoverability time out in seconds
    3. # 0: Always discoverable
    4. #debug.bt.discoverable_time=0
    5.  
    But... if continued disconnecting is the issue, maybe the same thing that helps wifi helps bluetooth (in other words, scan intervals). I have a HUGE feeling this will kill your battery, however, so if you want to try it post results please on both workability and how it effects charge time, etc. I would try but again I have no bluetooth devices right now. Good luck!

    ** to enable this remove the # in front of #debug.bt.discoverable_time=0
    try playing with the number too if it works but burns battery, lower number other than 0 should make it cut drainage faster but time out discovery quicker, etc.
     
  12. I don't know, I'm getting damn good battery life with just this ROM + Greenify (killing the Maps process, plus my location services are off):

    [​IMG]

    Usually the battery will only go down three percent over night when I'm asleep, so 30 minutes still showing as 100% is feasible.
     
  13. s810car

    s810car Newbie

    well couple other issues (probably caused by my over adjusting crap) caused my to go back to factory stock + root only atm. Gonna research a little more and get a proper testing environment here before I continue and mess up my only phone lol
    I'll probably be back on this one in like a week though, great rom when you don't mess it up too much :D
     
  14. Incakola

    Incakola Android Enthusiast

    I had this problem on my old motion going back to stock. I tried to format /sys first on recovery then using kdz to go back into stock then went to location settings and only checked GPS and not agps, it could be the other way around I forgot here is another post with other methods http://androidforums.com/showthread.php?t=763162

    http://androidforums.com/showthread.php?t=757442

    Edit: also if GPS is lost on stock too it will always not work if you flash a cm10 rom
     
    DunderMifflin likes this.
  15. johnnyl1111

    johnnyl1111 Android Expert

    @pg i noticed you have a 10.2 branch in your repo. does that boot at all?
    i'm about to build it and find out ;)
     
  16. Trackm4n

    Trackm4n Newbie

    after trying PG's CM10 and Bobz i decided to just get the CM wallpaper and call it a day.... I respect the time you guys put into it but it makes my phone run really hot even when on standby i might have put up with the hot phone in my pocket if the bluetooth worked and that apollo mod should have came with a airbag and seatbelts cuz it crashes so much. truthfully the stock rom is alot better its working and polished...I now realize if I want jellybean or kitkat its time to get a new phone
     
    SHOOTER403 likes this.
  17. johnnyl1111

    johnnyl1111 Android Expert

    you must have done something wrong or something because my phone doesn't get hot. it's actually kinda cold. and apollo always has sucked that's why i use walkman. and bluetooth works for me. maybe it's just certain brand bluetooth devices that work or something but mine works.
     
  18. Trackm4n

    Trackm4n Newbie

    im using a plantronics bluetooth that works great with stock rom but only plays music on PG's 0903 build, and i checked the checkbox to use it for phone calls.. also the missed call and messages count dont work ive tried PG's build on 3 diffrent occasions and it always gets hot, took a 2 houir nap and when i went to use my phone the screen was hot. whos build are you using and what fixes did you apply if any? i'd love to be able to get it a working CM rom but this one looks abandoned .
     
  19. michaelb04

    michaelb04 Member

    i need help i had my phone disconnected for a while now and decided to reconencted again with diffrent number and they couldent activate... how do i activate the phone... do i have to go back to stock... they gave me the instruction on how to activate... ##626*...
     
  20. johnnyl1111

    johnnyl1111 Android Expert

    that happened to me i had to call a special number and they walked me through it. i had to give them my sdcard serial # and go through several hidden menu's entering numbers. had to call from a different phone so i could do what they said while they were telling me.
     
  21. michaelb04

    michaelb04 Member

    they gave me all the code i need but dont know where to put them cause ##626* wont work so what do i dial???
     
  22. johnnyl1111

    johnnyl1111 Android Expert

    you have to unbrick to stock to do it
     
    michaelb04 likes this.
  23. michaelb04

    michaelb04 Member

    ok thanks
     
  24. Trevor Philips

    Trevor Philips Android Enthusiast

    I don't mean to sound like a big baby, but somebody please tell me CM10 is still being worked on
     
  25. PlayfulGod

    PlayfulGod Extreme Android User
    Thread Starter

    nope I wanna watch ya cry like a baby!! ;)

    Since nightlies have kicked off for the Gnex, I'll have more time for my other projects. ;)
     

LG Motion 4G Forum

The LG Motion 4G release date was August 2012. Features and Specs include a 3.5" inch screen, 5MP camera, 1GB RAM, Snapdragon S4 Plus processor, and 1700mAh battery.

August 2012
Release Date
0
Reviews
Loading...

Share This Page

Loading...