I flashed this but I have no date what so ever.... I can't even connect to wifi. can someone help me?
Upvote
0
I flashed this but I have no date what so ever.... I can't even connect to wifi. can someone help me?
Yeah you're probably gonna need to provide some more info.
Like exactly step for step what you have done so far, so we can see what might have gone wrong and help you out.
Off hand kinda sounds like the connection issues I had to work through (read my post #48 above).
I flashed the stock odexed rom over CLEAN stock because i intitally formatted /system in recovery by accident and it wouldn't boot back up.
So i flashed that, it booted back up but i had no data, no radio. So iflashed the modem, i now have radio but i have no data. I switched to 3G and the icon pops up but i still can't surf the web. I flash the modem again, nothing. I tried everything. I just have no data. I can call and text though.
EDIT: just realized i was in Boost Mobile forum, i have virgin mobile lol. guess rules still apply though, right?
So not clear from your response about "CLEAN stock"; did you Odin the stock NDC tar or already have the OTA 4.4.2 update?
What does it say under Baseband version?
That modem may take 2 or 3 shots to get it to take. If it isn't working after 3 tries you probably need to start the process over again beginning with Odining the tar.
I had to go through the whole process several times to get everything to take. Check the baseband version and conection at each step as you go through. My first pass i had Unknown on baseband version after i got done flashing everything. 2nd time i had right baseband & I had connection after odin the tar, lost connection it after flashing the deodexed and finally regained after 2 modem flashes.
Yeah this is Virgin/Boost thread cause ROM works for both.
No i wouldn't use mobile Odin. There's a bunch of warnings in the xda thread to not do that.
I would make sure to be checking the md5sum on your downloads also. Been a bunch of people having not ding that cause issues.
Odin tar. Then odin a recovery, most of us are using philz. (Sorry can't find link from my phone) I'm using philz d2lte v6.48.4
Rest is correct.
I odin back to stock tar but i still have no data. this is so fustrating
it keeps showing "(check mark) System Update..." in the status bar. it's not allowing me to update my PRL, Profile or Firmware.
I odin back to stock tar but i still have no data. this is so fustrating
it keeps showing "(check mark) System Update..." in the status bar. it's not allowing me to update my PRL, Profile or Firmware.
steelyus1 is right, something is off here. the 3 possibles are, hardware, software, dennytechno (no offense, 90% of my computer problems are me ). My thoughts are that since the hardware was working before you started it's prolly not hardware and we can't help with the hardware so much anyway, so lets try to eliminate the other 2 first.
Suggestions;
try flash stock Rom again - check md5sum first to make sure you have good download.
Try stock ROM from another source like Sammymobile (you will have to create a free account) Install instructions are below.
Try the Wicked or Conquest ROM's - check md5sum first to make sure you have good download. Also note according to bilgerryan for Wicked-X you may need to flash ND8 tar first cause it uses ND8 boot loader, read the OP.
FYI - Also if you get the stock working you can root it from Philz.
Sammymobile Firmware Installation Instructions
Extract (unzip) the firmware file
Download Odin (I prefer v3.07) If you want another version look here
Extract Odin zip-file
Open Odin
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
A few minutes is wrong. It's taken anywhere from 10 to 14 minutes to flash the stock image. It's important to let people know that so they don't think the flash has gone wrong.
I came very close to pulling the plug when I flashed the Sprint version months ago because no one had yet given a time frame for the flash. This is the longest Odin firmware flash I've ever done on a phone.
Yeah thanks wetbiker7
That "few minutes" instruction is from the Sammymobile site - that's the problem with free information, sometimes it's worth just what you paid for it.
I remember seeing that "it takes 15 minutes to flash" in one of the threads, can't remember if it was this ROM over on XDA or the Wicked thread...
I didn't take anywhere near that when I've flashed it, prolly around 6 mins, and I've Odin'd the NDC/ND8 tar or Sammymobile stock 4-5 times.
So anyway - Be Warned - YOUR MILEAGE MAY VARY on the install times. :smokingsomb:
Yeah. What you read was probably one of the discussions I had with JDsingle. As far as I know he and I were the 1st ones to mention the length of time it took to flash the stock image. It took him right at 15 minutes and took me over 10. This was before Boost had even released their update. We flashed the Sprint ND8 image.
steelyus1 is right, something is off here. the 3 possibles are, hardware, software, dennytechno (no offense, 90% of my computer problems are me ). My thoughts are that since the hardware was working before you started it's prolly not hardware and we can't help with the hardware so much anyway, so lets try to eliminate the other 2 first.
Suggestions;
try flash stock Rom again - check md5sum first to make sure you have good download.
Try stock ROM from another source like Sammymobile (you will have to create a free account) Install instructions are below.
Try the Wicked or Conquest ROM's - check md5sum first to make sure you have good download. Also note according to bilgerryan for Wicked-X you may need to flash ND8 tar first cause it uses ND8 boot loader, read the OP.
FYI - Also if you get the stock working you can root it from Philz.
Sammymobile Firmware Installation Instructions
Extract (unzip) the firmware file
Download Odin (I prefer v3.07) If you want another version look here
Extract Odin zip-file
Open Odin
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minutes
I personally don't find that excessively long with flashing a stock .tar, with everything its doing. But, the caveat is i was told back when after doing it the first time. And i did see biker's and single's warnings first hand in here.
So sorry i haven't been able to get back to you guys
but i got everything working again, i dialed ##72786#,it resetted my number and i clicked"Activate Phone" in the More settings and it rebooted, my 4G came back within in a minute. Thanks for your help!
No correction needed bro. You hit the nail on the head.
He may be running a 4.4.2 ROM but unless his baseband/modem says either ND8 or NDC he is not running the true Kit Kat bootloader.
JD, I know you know this. I'm basically posting the info for others who do not.
Modman, if you go into settings and then look under about phone or about device, look where it says baseband. If the last 3 say ND8 or NDC then you are officially running the Kit Kat bootloader. If it says anything else then you are not and will need to manually flash it.
Where are the download links? Thnx
No. You need the KK boot loader too run KK. First bullet in the "notes" part my friend
can anyone point me in the correct direction to actually find the nd8/ndc .tar that I can flash in odin...I want to see if this rom could fix my problem but it clearly says I will bootloop if flashing from jb
Pushing the good stuff out as always Glad to see folks are getting some use out of it. Still nothing in Kies on wifey's phone for the latest S3 update, but I'll keep checking.
We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.