can u post your PRl too? please lol, the directions are on this thread to extract ur prl
For those of you that have Ascend and 3023 PRL and are on stock froyo, please try this to extract the PRL.
I will post this guide..let me know if it works for Ascend..you will need a program called CDMA WORKSHOP 2.7, I can't post the link here. You will also need to have the ascend usb drivers.
Download and install usb drivers for Ascend from here: ascend_usb_drivers.zip
On Phone Dial this code
*#*#2846579#*#*
A menu will pop up
Then
Go to projectmenu -- Background Settings -- USB Port -- (select) Manufacture mode
Then
Go To settings -- About Phone -- Status -- MEID (write down your MEID)
GO to whiterabbit's android site and enter your MEID and click on CALCULATE and this will give you your metro SPC code, write it down. android - whiterabbit.org
Make sure on Phone USB Debugging is on
Now On Windows go to device manager -- ports -- DBAdapter Reserved Interface
(Remember your COM PORT)
Now open CDMA Workshop and choose the port you took note of earlier...click connect. Open the security tab and enter the SPC in the box and click SPC then send.
Now go to Other tab and under the PRL section click on READ (Universal, NAM1), this will let you save the PRL to a .prl file on your PC. Save it and upload it here .
Let me know if this works for you if not PM me with your error codes.
thanks but wont be able to upload it till later on
will California ever have 3G on Metro pcs service even if the manual prl is inserted?
i got the 3023 PRL but no 3G, i live in Brandon near Tampa, tomorrow i'll be heading down to South Tampa. thanx Nuttmeg for the PRL.
lucky...
i have3 3g but it sometimes works, but almost never on the 3023 prl
will get better as they might just now be releasing 3g in your area, mines was the same way when they was releasing it in my area, and it was real spotty, its still spotty in places but have gotten better over the weeks.
so i didnt pay my bill yet but notice i have the 3g sign n it say my service is connected but not disconnected i flash back to cm7 after doing the prl update when i was on the stock 2.2.2 it didnt have 3g sign and did say service disconnected werid right.... lol i thought i was going to have free metro service lmao... so when i finally decide to take the time to actually pay my bill will anything weird will happen to my service???... would be mad that i paid a bill for a phone that doesnt work i think everthing should be fine i hope....
Holy weird. Pushed the 3023 and for the first time EVER go the famous "Roaming Indicator Flashing" thing.
Even weirder while typing that it went away Ahahaha
No I couldnt even tell you the last time I did flash the MetrOff. Ive never had the roaming indicator and have never had an issue with mms. I had to switch to Bob's build to push it because no drivers will install on PG's new build and I got it right away when my phone rebooted and then it went a way like 3 minutes later while I was typing that but I just switched back to PGs and it never showed up. Ill go flash MetrOff just for the hell of it tho. Is the one on the wiki the updated one?
I have the broken usb build. And Ive never had problem. Still dont. Only "problem" I have had concerning usb is one of the driver wont istall so the debugging wont work, but the debugging will work if I toggle it off and on in the settings then it works.
Ran a speed test. My 3g is slow as shiiit. ping 188ms DL- 150kbps upload- 78kbps
Sad thing is its still faster then when on 1x ahaha
thats y i did it i knew the risk loleverything works, only if metro is down in your area would be the only issue...but like anything, Do It At Your Own Risk!!!
We've been tracking upcoming products and ranking the best tech since 2007. Thanks for trusting our opinion: we get rewarded through affiliate links that earn us a commission and we invite you to learn more about us.